Feature:
5 Input channels
On this model all 5 channels have to be the same input type but can be user set to be either Type K, Type K, Type T and PT100
Each indicator has two alarm outputs
The alarms work across the board so if any channel exceeds the set point, it will trigger
You can choose as an optional extra to have RS485 comms
Universal power supply (90~264 Vac 50/60 Hz)
You can disable any channel you may not be using
You can set the scan rate between 0~10 sec / ch
You can also set the scan rate to 0 seconds and manually select a channel to display or manually scan from one channel to another as and when required