Multi-channels Module type PID Controller (MMC)

SD 430 Microprocessor Indicator

MPC Microprocessor Based Module Type PID Controller

 
 
 
 
 
 
 
 
You are   visitors
 
Home > Produtos > Transmitters & Converters > iSignalTrans
   
IST-P Isolated 3 wire potentiometer transmitter
 

Feature:
Up to 15 User defined linearization points available. The
    user linearization feature allows the volume of a tank¡¦s
    contents to be calculated from the height of the material
    in that container. Up to 15 linearization points can be
    defined by user in the measurement range
Configurable without Power Connected
3750 Vrms isolation between input and output
2-wire loop-power technology, 4 to 20 mA analogue
    output
Fault signal on sensor break presettable
Accept 200 ~ 60K ohms 3 wire Potentiometer input
Head mount  
   
 
The IST-P DIN rail transmitter is user configurable with The software and interface cable URC-1020 or handheld programmer.The is user-friendly software. The latest release version can be download free from website. Interface cable consist of interface converter and USB plug. It can be purchased separately from The supplier. During configuration the transmitter can work alone without connecting to a power source.
 
 
Specification:
   
 
Input

200£[~60K £[

Accuracy ¡Ó 0.1% F.S.
A/D Resolution 16 bits
Input Sampling Rate <200ms
Power Supply DC10~36V
Max Load Max Load = ¡] V-10 ¡^ /0.02 ¡]£[¡^
Output Resolution 0.6 £g A(15 bits)
Output Respond Time <200ms
Common Mode Rejection Ratio(CMRR) ¡Ö 80 dB
compatibility En 50081-2, En 50082-2
Galvanic isolationOperating 3.75 KV . between input and output
Temperature -10 to 50 ¢X C
Humidity 0 to 90% RH
 
Application:

 
Dimension:
 
 
 
Wiring Diagram:
 
 
 
Block Diagram:

 
 
Ordering Infomation: