Multi-channels Module type PID Controller (MMC)

SD 430 Microprocessor Indicator

MPC Microprocessor Based Module Type PID Controller

 
 
 
 
 
 
 
 
You are   visitors
 
Home > Produtos > Transmitters & Converters > i SignalCon
   

ISA Dual Channel Isolated Signal Conditioner/Converter (for DC linear Signal)
 

Feature:
Different input type can be set to each channel
Programmable for various input signals and  measuring    range
Configurable without external Power Connected.
Input :
millivolt , Voltage, and Current
Output device:
ISA-D: Dual Analog Outputs:4 ~20 mA ¡B0~5VDC¡B0~10VDC ¡KOUTPUT1=PV1 ; OUTPUT2=PV2
ISA-C : One Analog Output(OUT1) 4 ~20 mA ¡B 0~10VDC ¡K with RS485 com port:MODBUS-RTU (OUT2); OUTPUT1=PV1
High accuracy in total ambient temperature range.
Fault signal on sensor break presettable.
Defines the output signal to be upscale(>20mA) or
    downscale (<4 mA) on Sensor break or cut the output
    signal on upscale(20mA) or downscale (4 mA)

   
 

The Din Rail converter is user configurable with the software and interface cable URC-1020 or handheld programmer.
The is user-friendly software. The latest release version can be download free from website.
Interface cable consist of interface converter and USB plug. It can be purchased separately from supplier. During configuration the converter can work alone without connecting to a power source.

 


Specification:
   
 
Input Voltage/Millivolt: -480mV ~ 480mV ; -96V ~ 96V refer to Table 1
Current : 0 ~ 177mA refer to Table 1
Accuracy Refer to Table 1 Input Signal
A/D Resolution 16 bits
Input Sampling Rate <200ms
Power Supply DC 16~32V
Power Consumption 1.7W (max)
Output Current Output: 4~20mA( Resistive load 600£[ max.)
Continuous Voltage Output: 0~50mV; 0~10V¡K( Resistive load 600£[ min.)
Output Resolution 0.6 £g A(15 bits)
Output Response Time <200ms
Common Mode Rejection Ratio(CMRR) >80dB
Electromagnetic Compatibility (EMC) En 50081-2, En 50082-2
Galvanic isolation 2.8 KV. between input and output
Operating Temperature -10 to 50 ¢X C
Humidity 0 to 90% RH
Dimension 75mm(W)x87mm(H)x18.5mm(D)
 
Table 1 Input Signal
Input Type
 Maximum Range Accuracy
Millivolt -480mV ~ 480mV
 ¡Ó0.2mV
Millivolt -240mV ~ 240mV ¡Ó0.02 mV
Millivolt -120mV ~ 120mV ¡Ó0.02mV
Millivolt -60mV ~ 60mV ¡Ó0.02mV
Millivolt -30mV ~ 30mV ¡Ó0.02mV
Millivolt -15mV ~ 15mV ¡Ó0.02mV
Voltage
-96V ~ 96V ¡Ó0.02V
Voltage -48V ~48V ¡Ó0.02V
Voltage -24V ~ 24V ¡Ó0.02V
Voltage -12V ~ 12V ¡Ó0.02V
Voltage -6V ~ 6V ¡Ó0.02V
Voltage -3V ~ 3V ¡Ó0.02V
Current 0 ~ 177mA ¡Ó0.02 mA
Current 0 ~ 88mA ¡Ó0.02 mA
Current 0 ~ 44mA ¡Ó0.02 mA
Current 0 ~ 22mA ¡Ó0.02 mA
Current 0 ~ 11mA ¡Ó0.02 mA
Current 0 ~ 5.5mA ¡Ó0.02 mA
 
 
 
Dimension:
 
 
 
Wiring Diagram:
 
 
 
Ordering Infomation: